Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Sedira, Sofianea; b; | Mendaci, Bilelc
Affiliations: [a] Ceramic Laboratory, Mentouri Brother’s University, Constantine, Algeria | [b] Department of Applied Biology, Faculty of Natural Science and Life, Mentouri Brother’s University, Constantine, Algeria | [c] Microbiological Laboratory Engineering and Application, Mentouri Brother’s University, Constantine, Algeria
Correspondence: [*] Corresponding author: Sofiane Sedira. E-mail: sofiane.sedira@umc.edu.dz
Abstract: BACKGROUND:Titanium nitride (TiN), titanium carbide (TiC) and titanium carbonitride (TiNC) thin films show promising practical applications due to their photoelectric properties and corrosion behaviour. OBJECTIVE:In this work, we investigated the factors which may affect the optical properties and the corrosion behaviour of these coatings. METHODS:The titanium coatings were carried out by sputtering using the target of Ti6Al4V (purity 99.96%) with different N2, CH4 and Ar partial pressures. XRD, FTIR, Raman and SEM with EDX studies show the formation of titanium nitride, titanium carbide coatings. Uv-vis spectroscopy was carried out to estimate the optical properties using the numerical Swanepoel method. Potentiodynamic polarization studies in Hank’s solution show that the corrosion resistance is found to be in the order of C-TiN(2) > C-TiN(1) > TiN > TiC. RESULTS:A high protective efficiency was determined (60%) when comparing TiNC(2) and TiC corrosion current densities, which confirms the lower corrosion velocity and the higher passivation stability of the coatings composed with TiN and TiC phases. Electrochemical impedance spectroscopy studies show that the Rct increases in the following order: TiC < TiN < C-TiN(1) < C-TiN(2), highlighting the fact that C-TiN(2) coating has the higher corrosion resistance.
Keywords: Titanium coatings, optical properties, Swanepoel method, biomedical applications, corrosion resistance
DOI: 10.3233/BME-201134
Journal: Bio-Medical Materials and Engineering, vol. 32, no. 2, pp. 73-83, 2021
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl